As I am going to be video-blogging the latest advances in Linux on ARM at the Linaro Connect Hong Kong conference next week, I just landed a few days early so that I can now video-blog again video-blog the latest news out of Shenzhen. It’s appropriate for me to video-blog the latest news in Shenzhen monthly don’t you think? In this video, I got the Zopo staff at the Zopo store on Hua Qiang Bei Shenzhen to update the firmware on my Zopo ZP100 MT6575 ARM Cortex-A9 based phone because I had a hard time figuring out how to do it looking at the Chinese-only http://bbs.zopomobile.com ICS seems to be extremely smooth on the MediaTek MT6575, I’m going to ask Zopo in the days to come what they expect to do about reaching the European, US markets and worldwide with this phone. Check back in the days to come for the latest news from Shenzhen as I’m hearing about an upcoming Dual-core MediaTek MT6577 to be in an upcoming Huawei 4.5″ low cost super phone, the i.MX6 is being worked on by Shenzhen based PCB design houses, Rockchip is very close to take large market share for tablets out of Shenzhen with their new Dual-core RK3066 platform. Check back on http://ARMdevices.net for a lot of new videos about those. Let me know in the comments what you would like me to film and do in Shenzhen. I have some big plans to finally do something about group buys (through reliable and trusted Shenzhen based device makers and sellers) and I plan to launch some new special features here on http://ARMdevices.net during the next few days so check back. Source

13-circuit-card-manufacturer-01

PCBWING Technology Co., Ltd – Prototype PCB Mfg + Assy

Based upon https://www.pcbwing.com/Aboutus.php

PCBWING Technology Co., Ltd is among the list of China’s biggest unit providing printed circuit board services, which is a partnership of three of the top 10 printed circuit board makers in China. Our specialty are quick-turn-time, low quantity orders.
We are a new electronics contract manufacturer located in Beijing, China. We have already been specialized in printed circuit board prototype in the past 12 years. We’ve supported well known enterprises or institutions across the globe, for instance Microsoft, HP, Toshiba, Jet Propulsion Laboratory of China, Altium, University of Cambridge, University of Wisconsin, Stanford University, Harvard University, Beijing University, Siemens and China Mobile. We have cut-throat rates, well-trained specialists and good quality production techniques. We invited customers to contact with us and think about us as a effective provider for printed circuit board manufacturing services.

We provide:

Quality. Cutthroat pricing. On time shipping.

PCBWING Technology Co., Ltd will be your recommendable producer for printed circuit board prototype service.

Contact with Us

Sales Office Contact:
[email protected]
[email protected]

Help support Contact:
[email protected]
[email protected]
[email protected]

Marketing campaigns Contact:
[email protected]

Phone number:
+86-15601330384

Location:
Room520A , Heqiao Plaza B Tower No.8 Guanghua Road
Chaoyang District , Beijing
China Postcode 100026

13-circuit-card-manufacturer-01

JY Electronic Technology Co., Ltd.

Based upon the information on http://www.jycircuitboard.com/company/company-profile-1.html

JY Group is comprised of JY Electronic and BLD Electronic, consentrate on the printed circuit board manufacturing and printed circuit board assemblage production , design of electronic devices as well as mold shell . PCB manufacturing and printed circuit board assemblage , both printed circuit board prototyping as well as mass production are accepted , printed circuit board products to a maximum of 24 layers . All of the printed circuit board assemblage devices are manufactured by Panasonic , we are in a position to cope with PCB manufacturing and PCBA orders against customer’s specifications. 100% E-test and functional testing for printed circuit board and PCBA before they’re delivered to our customers. We’ve earned the many different management certifications such as UL , ISO , TS16949 , OHSAS and so forth. PCBs and MOLD SHELL DESIGN as per the needs you have, you can expect custom made products and the mold shell design and components sourcing service . we’ll purchase the top quality materials that can be found. High standard, prompt deliveries are our promise. With the help of decades of experience in this line of business, we have business collaboration with many fortune 500 enterprises which include BMW, GREE, NIDEC, SUMITOMO and a lot more. We anticipate to have possibility to help you along in the future. For even more information and facts please visit our web site : www.jycircuitboard.com

Contact with Us

Business Name: Dalian JY Electronic Technology Co., Ltd.
Location: Floor 1-4, No. 13-1, Youquan Road, Zhanqian Street, Jinzhou District, Dalian, Liaoning, China
Telephone: 86-411-66361648-806
Fax: 86-411-66361010
Email address: [email protected]

13-circuit-card-manufacturer-01

YingStar

In accordance with http://www.yingstar-pcba.com/choose.asp

YingStar Summary

To thoroughly offer our customers professional services with quickest time and least expensive cost, YingStar Technology possesses its own Electronic Circuit Board manufacturing unit (established in The year 2002, nestled in MeiZhou City, GuangDong province), Electronic Circuit Board assemblage manufacturing facility (built up in 2006, nestled in Bao’ An district, Shenzhen City) and Electronic Circuit Board design staff. YingStar offers one stop services including Electronic Circuit Board design, prototyping to mass Electronic Circuit Board assemblage production. Of course, if you have placed volume order to YingStar and your design is fresh and have to be evolved or revised in the real application, our expert technicians can offer you the solid support free of charging any extra dollars.

More competitve Fee

YingStar on a regular basis stock around 5000 common components from excellent providers and work with the prominent electronic elements suppliers like DigiKey, Mouser, Element14, , Avnet, and Future Electronics to guarantee our logistics system is sleek and meet both the urgent needs and common demands with shortest lead-time and very competitive rate.

Fast Delivery

We can easily do the punctual delivery and shorten clients’ wait time, because:
1, We consistently hold around 5000 commonly used components;
2, We have essentially the most experienced procurement team and cooperate with famous electronic elements vendors;
3, We have our own Electronic Circuit Board and PCB assemblage manufacturing unit;
4, We have our own design department who can enable clients to address the complex technical disorders.

Quality Promise

We make certain that all the products we produced are 100% certified and have no less than 12 months warranty time, but the requirement is that all the components of the products are offered by us (including Electronic Circuit Board, electronic elements and assemblage job). And for those products just partially services offered by us, we are only in charge of the liability of the services supplied by us.

Confidentiality

We treat all of your info as highly confidential and do our best to secure your intellectual property (IP) rights.

The secrecy of your information is secured with the subsequent means and procedures.

Accredited access only: To outer users, only proved users have access to info that he/she is permitted to uncover. To internal users, access of info is on a need-to-know basis. Your info are compartmentalized and linked with number IDs. To illustrate, our production specialists who is going to view design files are only able to see project and customer IDs; our delivery will not display billing information; and our accounting cannot view design files.

Security exam: We perform frequent security exam to protect our security criteria.

Removal of info: We shall wipe out any specific info as required.

Contact with Us

Shenzhen YingStar Electronics Co., Ltd
Phone: 0086-755-27808878
Fax: 0086-755-27316461
Office Location: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, P.R.C Zipcode:518101
Factory Location:
6F, 2nd Building, Zhuguang East Rd, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

13-circuit-card-manufacturer-01

UNI PRECISION INDUSTRIAL China HK

As per : http://uniprecision.com/about-uni-precision-industrial/index.php

For above 30 years Uni Precision has supplied outstanding contract manufacturer services to customers around the globe. We offer engineering support, production automation, logistics administration and a broad range of contract manufacturing capabilities.

Superior quality & Great Value – Electronic Circuit Board Outsourced Manufacturing
Bendable operations and devoted customer care has empowered Uni Precision to become one of the most famous contract makers in China. We work to go above expected results for consignment, turnkey and made-to-order manufacturing services.

Our Highlights:

Quality Qualifications
Sophisticated Inspection & qualification
Wide-ranging Manufacturing Abilities

Purchasers across the world go to Uni Precision for excellent quality engineering and contract manufacturing services. Our proficient operations, low operating costs and expert logistics management minimizes expenses and offers good value to our buyers.

Based in HK, with a 7,500 sqm ( 80,700 sq. ft.) manufacturing area is situated in Dongguan, China. With in excess of 600 employees and state-of-the-art manufacturing machines, we provide incomparable quality, qualification and value. Uni Precision was one of the first-batch companies in China to attain ISO 9001:2008, and we have persisted to increase our quality certificates to satisfy the higher level of qualification and reliability.

We are A Contract Manufacturer in China With Worldwide Sales Help

Uni Precision makes an effort to go higher than purchaser anticipations. Our core corporation culture is aimed at offering the highest quality engineering and contract manufacturing services, even though clients usually opt for Uni Precision for our service & support. With sales workplaces in Hong Kong and on the West Coast of the U.S ., we supply reliable customer service and obvious correspondence all through the Electronic Circuit Board production process.

Being a China’s leading contract producers, we are able to limit customers’ exposure and risk by interacting with vendors straight. We fully grasp the Chinese culture, language and legal system, and will make an effort to make certain quality, qualification and unparalleled value. We appreciate delivery demands and hold partnerships with significant delivery companies which accommodate punctual delivery.

Adaptable Electronic Circuit Board Contract Manufacturing Focused Upon High quality

Our seasoned staff members is specialized in quality, with a managing group who highlights regular training, open communications and group interaction. Our corporation culture is dedicated to quality and effectiveness, and is all set to work with you to present a solution for your Electronic Circuit Board requires. Uni Precision works in concert with a couple of the most excellent high-technology enterprises, and is ready to assist you to reduce costs via contract manufacturing services.

Get in touch with Uni Precision today to find out more on us or to request for a quotation. We are among the most famous contract producers in China, and are all set to deliver unrivalled leading quality and cost.

Contact with Us

Location:

Uni Precision Industrial Limited
Room 1303, Tower One, Harbour Centre
1 Hok Cheung Street, Hunghom
Kowloon, HK

USA Office:

Tel: 510-610-4649
Email: [email protected]

Hong Kong Office:

Telephone number: (852) 2356 5800
Fax: (852) 2364 9336
Email: [email protected]

Leave a Reply

Your email address will not be published. Required fields are marked *